Home Page ButtonAbout Us ButtonContact Us ButtonLinks Button
Weldgrip Geotechnical LogoGound Stabalisation solutions for the civil engineering and mining industries - Strapline
Weldgrip Gripforce ® Rockbolts
Weldgrip Products

- Machinery

- Universal Grout System
- AM1000-1 Thixotropic Grout
- Grout Pump Systems
- Turmag Drilling Machine
- Gopher Drilling Machine

- Reinforcement

- Self Drilling Steel Anchor System
- Composite Self Drilling Soil Nails
- Gripforce® Composite Soil Nails & Rockbolts
- FT500 Fully Threaded Composite Bar & Tube
- ATB700 Fully Threaded Bar & AT Rockbolts

- Ancillaries


- Drill Bits
- Drill Steels

- Mesh Products

- Double Twisted Hexagonal PVC Coated Mesh
- Gabions & Mattresses

Weldgrip Case Studies
- Dawlish Cliff Stabilisation
- Ramsden Bellhouse & Kent Hill
- Flood Risk Management
- Boness Embankment Stabalisation
- A259 Road Stabilization
- Doveholes Stabilisation
- Kingsand Sea Defence
- Lancaster Canal
- Coalfields Link
- Whitehaven Harbour
- Blaston Hollow
- A638 Rocknetting
- Chatham Dock
- Tondu Iron Works
- Brokenberry Quarry
- A5 - North Wales
- The Sidmouth Cliffs
- Conway Castle
- Glenholt Tunnel
- Athens Metro
- The Bradway Tunnel
- PorthKerry Tunnels
- Conisbrough Tunnel
- Face Salvage
- Mesh Cage System






Wall Reinforcement Weldgrip Gripforce ® Rockbolts

Case Study Project Info
Project Title Kingsand Sea Defence Wall Reinforcement
Client Caradon District Council
Consultant John Grimes Partnership Ltd
Main Contractor Seastructures Ltd
Featured Products Weldgrip Gripforce ® Rockbolts

Thumbnail - Click for  Enlargment
Thumbnail - Click for  Enlargment
Thumbnail - Click for  Enlargment
Thumbnail - Click for  Enlargment

Kingsand, in Cornwall, looks out onto the English Channel, it’s existing sea defence wall has been badly abraded by the wave action and the coarse beach material.

This has resulted in the wall being undermined, with the added hazard of sharp steel reinforcing bars projecting onto the public beach. To combat these problems it was decided that a Duracrete 50N concrete mix (supplied by Hanson Plc) with granite aggregate should be used to slow down the abrasion process.

Weldgrip’s BBA approved Gripforce ® bars were chosen to reinforce the concrete as they:

1) Would abrade at the same rate as the concrete and would therefore eliminate the risk from the sharp steel projections.
2) Did not require any additional corrosion protection.
3) Removed the problem of discolouration of the concrete caused by corrosion of the steel bars.
4) Offer a lightweight cost effective alternative to steel.

The Gripforce ® bars, 22mm in diameter and of various lengths, were fixed into pre-drilled holes in the existing concrete wall structure with two part resin.

The exposed end of the bars were fitted with a standard non-metallic nut. “Mesh” grids were created by using additional lengths of 22mm bar set at 200mm centres, both horizontal and vertical, with standard nuts being fitted at all corners.

Laps were 40 times diameter and plastic “tie-wraps” were used in lieu of steel tying wire. The bolts had to be fixed in position and the concrete poured with enough time for “curing” before the next tide reached the structure.

For additional information on coastal projects using Gripforce ® bolts and injection tubes please view our Chatham Dock and Whithaven Harbour Wall case studies.

  22mm Solid Bar Specification:

Ultimate Tensile Load 470 kN
Ultimate Shear Load 129 kN
Nominal Weight 0.75 kg/m
--- ---
Characteristics ---
Tensile Modules 47 GPa
Tensile Strength 1000 MPa
Flexural Modules 47 GPa
Flexural Strength 850 MPa
Bending Radius 2.5m
Elongation at Break 2.3%
Coefficient of Thermal Expansion 5 x 10-6/°C

 

Download the Printable PDF Brochure

If you would like to print this case study you can download the full printable brochure in PDF format.

You will need Adobe Acrobat Reader to view and print the brochure, if you need to download a free version of Acrobat Reader please click here.

Download the Case Study in PDF Format
Product Brochure - Soil Nails & Rockbolts - 620k
Divider

BBA Certificate
Weldgrip are also proud to have attained BBA accreditation and ISO 9001 standards in recognition of our continuing excellence in Geotechnical products and services.
ISO 9001

© 2008 Weldgrip Geotechnical , All Rights Reserved